2.13. Internal Commands

Content

1. Table of Command Categories

2. Description of all commands by category

2.1. Active Panel

2.2. Left Panel

2.3. Right Panel

2.4. File Operations

2.5. Configuration

2.6. Network

2.7. Miscellaneous

2.8. Mark

2.9. Clipboard

2.10. Navigation

2.11. Help

2.12. Window

2.13. Command Line

2.14. Tools

2.15. View

2.16. Tabs

2.17. Logs

1. Table of Command Categories

Internal commands may be groups by categories so here they are:

(back to top)

2. Description of all commands per category

Here is a quick description of all the internal command.

For each of them we will:

• list the command name
• display its icon
• when applicable, its default keyboard shortcut
• a quick description of it
• when applicable, quick description of possible parameters of it

(back to top)

2.1. Active Panel

These commands apply to the current selected panel, left or right.

Category "Active Panel"
Name	Description
cm_BriefView Ctrl+F1	Just the name of the items. If possible, more than one column.
cm_ColumnsView Ctrl+F2	One item per line, with default or user defined columns. Parameter Value Description columnset column set name show user defined column set (nothing, default) show default column set See column section.
cm_ThumbnailsView Ctrl+Shift+F1	Items shown as small images. If possible, in more than one column.
cm_FlatView Ctrl+B	Will scan all the directories of panel to show all content in one single panel. Parameter Value Description side left in left panel, as the cm_LeftFlatView command right in right panel, as the cm_RightFlatView command inactive in inactive panel (absent) in current active panel (nothing, default) in current active panel
cm_FlatViewSel Ctrl+Shift+B	Like the cm_FlatView command without parameter, but for selected files and folders only.
cm_QuickView Ctrl+Q	Content of selected item shown in opposite panel (instead of a separate window). See details here.
cm_SortByName Ctrl+F3	Sort items in active panel by name.
cm_SortByExt Ctrl+F4	Sort items in active panel by extension.
cm_SortBySize Ctrl+F6	Sort items in active panel by file size.
cm_SortByDate Ctrl+F5	Sort items in active panel by date.
cm_SortByAttr	Sort items in active panel by attributes.
cm_ReverseOrder	Invert sorting items displayed in the active panel.
cm_SrcOpenDrives	Open drives list for active panel.
cm_UniversalSingleDirectSort	Will sort specified column in specified order of the specified panel. See the following table for the possible parameter values. Parameter Value Description panel active will operate on active panel inactive will operate on inactive panel left will operate on left panel right will operate on right panel (absent) will operate on active panel column name sorted columns will be the "name-ext" ext sorted column will be the "ext" size sorted column will be the "size" datetime sorted column will be the "datetime" (absent) sorted column will be the "name" order ascending will sort with ascending order descending will sort with descending order (absent) will sort with ascending order Note: If any of these three parameters are not defined or are defined incorrectly; the default values for these parameters will be: panel=active, column=name and order=ascending. Example: "cm_UniversalSingleDirectSort panel=active column=size order=descending" This will sort the item in active by column according to size – larger files first.
cm_CountDirContent Alt+Shift+Enter	Compute overall size of the contents of each of the directories present in current selected panel.

(back to top)

2.2. Left Panel

These commands apply to the left panel, no matter which one is currently selected.

Category "Left Panel"
Name	Description
cm_LeftBriefView	In left panel, just the name of the items. If possible, more than one column.
cm_LeftColumnsView	In left panel, one item per line, with default or user defined columns. Parameter Value Description columnset column set name show user defined column set (nothing, default) show default column set See column section.
cm_LeftThumbView	In left panel, items shown as thumbnails. If possible, more than one column.
cm_LeftFlatView	Will scan all the directories of left panel to show all content in this single panel.
cm_LeftSortByName	Sort items in left panel by name.
cm_LeftSortByExt	Sort items in left panel by extension.
cm_LeftSortBySize	Sort items in left panel by size.
cm_LeftSortByDate	Sort items in left panel by date.
cm_LeftSortByAttr	Sort items in left panel by attributes.
cm_LeftReverseOrder	Invert sorting items in the left panel.
cm_LeftOpenDrives Alt+F1	Open drives list for left panel.

(back to top)

2.3. Right Panel

These commands apply to the right panel, no matter which one is currently selected.

Category "Right Panel"
Name	Description
cm_RightBriefView	In right panel, just the name of the items. If possible, more than one column.
cm_RightColumnsView	In right panel, one item per line, with default or user defined columns. Parameter Value Description columnset column set name show user defined column set (nothing, default) show default column set See column section.
cm_RightThumbView	In right panel, items shown as thumbnails. If possible, more than one column.
cm_RightFlatView	Will scan all the directories of right panel to show all this content in this single panel.
cm_RightSortByName	Sort items in right panel by name.
cm_RightSortByExt	Sort items in right panel by extension.
cm_RightSortBySize	Sort items in right panel by size.
cm_RightSortByDate	Sort items in right panel by date.
cm_RightSortByAttr	Sort items in right panel by attributes.
cm_RightReverseOrder	Invert sorting items in the right panel.
cm_RightOpenDrives Alt+F2	Open drives list for right panel.

(back to top)

2.4. File Operations

These commands apply to current selected item in current selected panel.
It includes operations like view/copy/move/rename/delete/pack/unpack/split etc.
These are probably the commands that have a direct impact with your files.

Category "File Operations"
Name	Description
cm_View F3	Open file in the viewer program. Parameter Value Description cursor 1/true/on/yes open only the file under the cursor 0/false/off/no default behavior mode text show as Text bin show as Bin hex show as Hex dec show as Dec The "mode" parameter allows to forcibly choose the viewing mode (in this case, plugins will be ignored, but we can switch the mode later in the viewer window), but this parameter will work under one of the conditions: there are no selected files, only the file under the cursor is selected, or together with the "cursor=1" parameter. See the description of the modes on this page.
cm_Edit F4	Open file in editor (internal or external, see Tools > Editor). Parameter Value Description cursor 1/true/on/yes open only the file under the cursor 0/false/off/no default behavior If several files are selected, the first selected file will be opened (as in the viewer): at the moment, the command's work with several selected files is not fully implemented, so you can deselect files, add "cursor=1" or use cm_EditNew.
cm_EditNew Shift+F4	Create a new text file in the current directory and open in the editor (see Tools > Editor) or open existing file (if a file with the same name already exists). You can enter the full name of the file (with path) and it will be created in the specified directory.
cm_Copy F5	Copy items from source to target. Parameter Value Description confirmation 1/true/on/yes shows confirmation dialog (default) 0/false/off/no does not show a confirmation dialog queueid <queue identifier> by default places the copy operation into a specific queue, works only if no confirmation dialog is shown, value 0 means it will be an independent operation (not queued) Example: "cm_Copy confirmation=1" will prompt user to confirm the copy, no matter how file operations confirmation for copy operations setting is set.
cm_CopyNoAsk	Copy items from source to target without asking for confirmation.
cm_CopySamePanel Shift+F5	Copy items in the same directory.
cm_Rename F6	Rename or move items. Parameter Value Description confirmation 1/true/on/yes shows confirmation dialog (default) 0/false/off/no does not show a confirmation dialog queueid <queue identifier> by default places the move operation into a specific queue, works only if no confirmation dialog is shown, value 0 means it will be an independent operation (not queued) Example: "cm_Rename confirmation=1" will prompt user to confirm the rename/move, no matter how file operations confirmation for move operations setting is set.
cm_RenameNoAsk	Rename or move items without asking for confirmation.
cm_RenameOnly F2, Shift+F6	Rename files in the same directory.
cm_MakeDir F7	Create a new directory.
cm_Delete F8, Del	Delete selected item to trash (recycle bin) or permanently. Deleting to trash can might not be available for all platforms. A different confirmation message is given when deleting to trash or permanently. Parameter Value Description confirmation 1/true/on/yes shows confirmation dialog (default) 0/false/off/no does not show a confirmation dialog (be careful!) trashcan 1/true/on/yes delete to trash 0/false/off/no delete permanently setting (default) acts accordingly to the global setting in File Operations, if that setting is enabled it will delete to trash, otherwise permanently reversesetting acts in the opposite way than setting
cm_Wipe Alt+Del	Wipe file.
cm_PackFiles Alt+F5	Pack items into archive. Parameter Value Description PackHere (nothing) compressed file will be in active panel directory (nothing, default) compressed file will be in inactive panel directory
cm_TestArchive Alt+Shift+F9	Validate the integrity of the content of selected archive file. If archive content is corrupted, error message will be reported.
cm_OpenArchive Ctrl+PgDn	If a directory is selected, will open this directory to show its content. If a file is selected, ignoring its extension, will try to open it as an archive based on its detected content (see ID configuration in other help page).
cm_ExtractFiles Alt+F9	Unpack one or more selected archives. Parameter Value Description ExtractHere (nothing) extracted items will be in active panel directory (nothing, default) extracted items will be in inactive panel directory
cm_OpenVirtualFileSystemList	Open VFS list.
cm_FileProperties Alt+Enter	Show item properties (size, data, attributes, etc).
cm_SetFileProperties	Adjust item properties like creation, modified and last access date, file permission, etc.
cm_EditComment Ctrl+Z	Create or edit comment for file/directory.
cm_ContextMenu Shift+F10	Shows context menu for files and folders. In Windows Double Commander will show the system context menu (as in Windows Explorer), in other operating systems Double Commander creates its own context menu with typical actions. Parameter Value Description justactionmenu 0/false/off/no menu will include the default system context menu AND the file extensions associated actions defined in Double Commander (default) 1/true/on/yes menu will include only the file extensions associated actions defined in Double Commander (the default system context menu won't be displayed)
cm_Open Enter	Open a file or program under cursor. Associated application based on file association configuration might be used, etc.
cm_ShellExecute Ctrl+Alt+Enter	Will invoke a program for the selected file from the system file associations. A single parameter may also be provided for the call.
cm_SymLink	Create symlink to file/directory.
cm_HardLink	Create hard link.
cm_FileSpliter	Split files dialog.
cm_FileLinker	Combine multiple splitted files together to form one single file.
cm_CheckSumCalc	Calculate file checksum (MD5, SHA1, etc).
cm_CheckSumVerify	Verify MD5, SHA1, etc. checksum.

(back to top)

2.5. Configuration

Access options and configurations of Double Commander.

Category "Configuration"
Name	Description
cm_Options	Open configuration dialog. Command supports a single parameter to jump to a specific configuration section. Here is a link for possible parameters to use.
cm_ConfigToolbars	Access configuration of the toolbar.
cm_ConfigDirHotList Ctrl+Shift+D	Access configuration of the directory hotlist. It is equivalent to cm_WorkWithDirectoryHotlist command with the following parameters: action=config source=%Ds
cm_WorkWithDirectoryHotlist	Access the "Directory Hotlist" configuration window. With the parameters, you may control which actions will be done regarding the hotlist. Parameter Value Description action add add an entry (target will be added depending of option in config) addsrconly will add an entry with source only addboth will add an entry and target config config an entry show simply show the config window addsel add the current selected directory(ies) (other parameters are ignored) directconfig config the specified "nth" entry (nothing) same as "add" source source_path the directory to add/config as "source" (nothing) directory the active panel is in target target_path the directory to add/config as "target" (nothing) directory the inactive panel is in index 0-999 if action=directconfig, the "nth" entry from the hotlist (nothing) index 0 will be used Example: "cm_WorkWithDirectoryHotlist action=addboth" This will add to directory hotlist both current directories of active and inactive frame as source and target respectively.
cm_FileAssoc	Open file associations configuration.
cm_ConfigFolderTabs	Access configuration for settings related with folder tabs.
cm_ConfigFavoriteTabs	Access configuration of the Favorite Tabs.
cm_ConfigTreeViewMenus	Access configuration of the Tree View Menus. This is where we could configure for which command by default we want to use the tree view menu style of selection.
cm_ConfigTreeViewMenusColors	Access configuration of the color used with the Tree View Menu section interface.
cm_ConfigSearches	Access configuration of general options regarding file search.
cm_ConfigHotKeys	Access configuration of hotkeys.
cm_ConfigSavePos	Will save current state and position of the main window of DC.
cm_ConfigSaveSettings	Will save all the current settings and history, just like if you would close application and restore. This might be useful if you've used DC during a long session and you want to save current context in case system would crash and you do not want to lose current history when you would restart DC.
cm_ConfigArchivers	Will launch the configuration page of the external archivers.
cm_ConfigTooltips	Will launch the configuration page for the tooltips.
cm_ConfigPlugins	Access configuration of plugins.
cm_AddPlugin	This command makes it easy to add plugins, two ways are supported: 1) Select a plugin file and Double Commander will automatically detect its type (WCX, WDX, WFX, WLX or DSX), open the required settings section and add it to the list. 2) Select the archive that contains the plugin and a special file pluginst.inf (the plugin file and pluginst.inf must be located in the root of the archive): the content of the archive will be extracted to the appropriate directory, the plugin will be added to the settings and Double Commander will open the corresponding settings section. If settings are stored in the user profile, Double Commander will use the "plugins" folder in the user's directory: Windows XP: C:\Documents and Settings\<UserName>\Local Settings\doublecmd\plugins Windows Vista/7+: C:\Users\<UserName>\AppData\Local\doublecmd\plugins Unix-like OS: /home/<UserName>/.local/share/doublecmd/plugins In the portable version, Double Commander will use the "plugins" folder in the program directory. Note: The first method of adding plugins requires to first place the files in a suitable location, however, in this case, Double Commander will report an error if the plugin could not be loaded (for example, if the operating systems does not contain the necessary libraries). Filename can be passed as a parameter.

(back to top)

2.6. Network

Related directly with computer network.

Category "Network"
Name	Description
cm_NetworkConnect	Network connect.
cm_NetworkDisconnect	Network disconnect.
cm_CopyNetNamesToClip	Windows only: copy names with UNC path.
cm_MapNetworkDrive(Alpha version) Ctrl+K	This command allows to connect network devices, the behavior depends on the operating system: Windows: will call the Windows system dialog to connect network drives. macOS: similar to the "Connect to Server" command in Finder. Linux and other Unix-like systems: Double Commander will prompt to specify the path, you can use GVfs paths (see FAQ for more details) or specify a local directory. Thus, the result of this command is similar to the cm_EditPath command.

(back to top)

2.7. Miscellaneous

Inevitable category with commands we did not in which category to place them!
Effort has been made to try to don't place too much commands in this category.

Category "Miscellaneous"
Name	Description
cm_CalculateSpace Ctrl+L	Calculate occupied space of selected items in active panel.
cm_Benchmark	Launch a simple benchmark consisting in running supported hash functions.
cm_RunTerm F9	Starts a terminal.
cm_ExecuteScript	Execute Lua script file (requires Lua .DLL installed), see details here. Parameter Value Description {first} file name path to Lua script file {param1} command line parameter #1 passed as command line parameters to Lua script {param2} command line parameter #2 {paramX} command line parameter #X
cm_LoadList	Load list of files/folders from the specified text file (plain text file containing full file names, one per line). Use UTF-8 without BOM. Parameter Value Description filename file name full path to file with list side left load list into left panel right load list into right panel active load list into active panel inactive load list into inactive panel (nothing) load list into active panel (absent) load list into active panel

(back to top)

2.8. Mark

Select the items on which the file operations will took place.

Category "Mark"
Name	Description
cm_MarkPlus Num +	Select items in active panel using a mask (provided or not) according the following parameters: Parameter Value Description mask <any string> the filter to use (absent) will prompt user to type filter casesensitive 0/false/off/no filtering will be done ignoring case 1/true/on/yes filtering will be done case sensitive (absent) case sensitivity will be the last one used for the current file view ignoreaccents 0/false/off/no filtering will be done evaluating an exact match regarding accentuated characters 1/true/on/yes items and mask will be compared ignoring their accent and ligatures replaced by distinct letters (absent) ignoring or not accents will be like the last time it was specified for that file view windowsinterpretation 0/false/off/no filtering will be done like DC legacy 1/true/on/yes filtering will be done like Windows (absent) using DC legacy filtering or Windows one will be like the last time it was specified for that file view attr d- filtering will ignore directories and take only files d+ filtering will ignore files and take only directories h- filtering will ignore hidden files (Windows) ux+ filtering will take only entries with attribute owner's executable (Linux) uw+|gw+|ow+ filtering will take files that are writable either by user, group or anybody else (Linux) (absent) filtering will be done according to what's configured in "File views", section "Marking/Unmarking entries", the option "Default attribute mask value to use". note: this means "attr=" with no right value. filter everything, no matter the configured "Default attribute mask" Note1: So if command is used without any parameters, user will be prompt to enter its filter and other options will be the same ones as the last time their were specified in the current session foreach file view. Note2: When using filtering like Windows as oppose of DC legacy, file with no extension will be selected with filter *.* Note3: When specifying the "mask" parameter, please note you may also use predefined selection type simply by preceding the name of it with symbol ">" like "mask=>Pascal files". Note4: When using filtering parameter "ignoreaccents=TRUE", the ligatured characters like "œ" for example will be evaluated as the sequence "oe". So for example "cœur" will match "coeur". Note5: The fact to use parameters like "casesensitive" for example will not affect the subsequent usage the cm_MarkPlus with no parameters which will use the default same parameters of last time it was prompting the user. Note6: Regarding the "attr" possible parameter values, see the "Searching for files with specific attributes." section in the "Find files" help file. The way to specify the filter regarding the attributes is the same. Example1: "cm_MarkPlus mask=*.pas;*.dfm;*.dpr;*.inc casesensitive=false" This will select all the files matching the given filter mask (which is basically common Delphi source file extensions) and ignoring the case of the letters. Example2: "cm_MarkPlus mask=*ecole*.docx ignoreaccents=true" This will select all the files matching the given filter mask (which is basically Microsoft Word document with the word "ecole" in them) ignoring the accents. This means it will select file with "école" and "ecole" in them since accent are ignored. Note7: If the duplicate search result is open in the active panel, all parameters will be ignored.
cm_MarkMinus Num -	Unselect items in active panel matching the mask (provided or not) according the the same parameters as the cm_MarkPlus command.
cm_MarkMarkAll Ctrl+A, Ctrl+Num +	Will basically select all the entries in the active panel according to attribute filter that follows. Parameter Value Description attr d- filter every entries that are not a directories d+ filter every entries that are a directories h- filter every entries that don't have the hidden attributes ux+ filter all entries with attribute owner's executable (Linux) uw+|gw+|ow+ filter all entries that are writable either by user, group or anybody else (Linux) (absent) will select everything that match what's configured in "File views", section "Marking/Unmarking entries", the option "Default attribute mask value to use". note: this means "attr=" with no right value. filter everything, no matter the configured "Default attribute mask"
cm_MarkUnmarkAll Ctrl+Num -	Will unselect all the entries of the active panel according to the same filter described in table of cm_MarkMarkAll command.
cm_MarkInvert Num *	Will Invert the selected state of all the entries matching the same filter described in table of cm_MarkMarkAll command.
cm_MarkCurrentPath	Mark files with the same path as item under cursor of active panel. Note: It might seem useless at first look but may be used in at least two situations: After you've filled a panel with search results coming from various level of directories After you've invoke the cm_FlatView internal command.
cm_UnmarkCurrentPath	Unmark files with the same path as item under cursor of active panel. See note of cm_MarkCurrentPath for the possible usefulness of this command.
cm_MarkCurrentName	Mark files with the same filename ignoring the extension as item under cursor of active panel.
cm_UnmarkCurrentName	Unmark files with the same filename ignoring the extension as item under cursor of active panel.
cm_MarkCurrentExtension Shift+Num +	Mark files with the same extension as item under cursor of active panel.
cm_UnmarkCurrentExtension Shift+Num -	Unmark files with the same extension as item under cursor of active panel.
cm_MarkCurrentNameExt	Mark files with the same filename and extension as item under cursor of active panel. See note of cm_MarkCurrentPath for the possible usefulness of this command.
cm_UnmarkCurrentNameExt	Unmark files with the same filename and extension as item under cursor of active panel. See note of cm_MarkCurrentPath for the possible usefulness of this command.
cm_CompareDirectories	Will select the items, in both active and inactive panels, that are not present in the opposite panel. Files with the same names will be compared by modification date, after that, newer files will be selected. Parameter Value Description files on/off select files directories on/off select directories (nothing, default) select files only
cm_SaveSelection	Used in conjunction with cm_RestoreSelection. The cm_SaveSelection command will save in internal buffer current selected items. Then later, the command cm_RestoreSelection could be use to re-select again the same items that were selected before.
cm_RestoreSelection	See previous cm_SaveSelection command.
cm_SaveSelectionToFile	Save the current selection to a file. You may specify the output filename into the first parameter. If no parameter is supplied, Double Commander will prompt user to enter one.
cm_LoadSelectionFromFile	Will read the content of the supplied file to select items from what is read from the file. This file could be supplied as the first parameter of the internal command. If no file is supplied, application will prompt use to enter one.
cm_LoadSelectionFromClip	Will select the item of the active panel based on the content of the clipboard.
cm_SaveFileDetailsToFile	Save all shown columns of selected items to file. You may specify the output filename into the first parameter. If no parameter is supplied, Double Commander will prompt user to enter one.

(back to top)

2.9. Clipboard

Actions related to interact between system's clipboard and selected items.

Category "Clipboard"
Name	Description
cm_CutToClipboard Ctrl+X	Cut selected text, file or directory to clipboard.
cm_CopyToClipboard Ctrl+C	Copy selected text, file or directory to clipboard.
cm_PasteFromClipboard Ctrl+V	Paste data from clipboard.
cm_CopyNamesToClip Ctrl+Shift+X	Copy item names to clipboard.
cm_CopyFullNamesToClip Ctrl+Shift+C	Copy item full names to clipboard. One parameter is available, we can specify the preferred directory separator: Parameter Value Description separator directory separator use "/" or "\" (without quotes) (nothing, default) use the system value: in Unix/Linux system it will be "/" and in Windows it will be "\"
cm_CopyPathOfFilesToClip	Will copy the full path of the current selected items including an ending directory separator. One parameter is available, we can specify the preferred directory separator, see the description of cm_CopyFullNamesToClip.
cm_CopyPathNoSepOfFilesToClip	Will copy the full path of the current selected items excluding an ending directory separator. One parameter is available, we can specify the preferred directory separator, see the description of cm_CopyFullNamesToClip.
cm_CopyFileDetailsToClip	Will copy file information of selected items onto the clipboard.

(back to top)

2.10. Navigation

To go from one folder to another to access various items according to their location.

Category "Navigation"
Name	Description
cm_DirHistory Ctrl+H	Invoke dir history menu. Parameter Value Description menutype popup directories in history will be displayed in a popup menu treeview directories in history will be displayed in a tree view menu (nothing) the default is assumed to be through a popup menu position panel menu will be shown from the top left corner of active panel cursor menu will be shown at the current mouse cursor position (nothing) the default is assumed to be from the top left corner of active panel (nothing, default) popup menu shown from top left corner of active panel
cm_DirHotList Ctrl+D	Directory hotlist. Parameter Value Description menutype popup hot directories will be displayed in a popup menu treeview hot directories will be displayed in a tree view menu (nothing) the default is assumed to be through a popup menu position panel menu will be shown from the top left corner of active panel cursor menu will be shown at the current mouse cursor position (nothing) the default is assumed to be from the top left corner of active panel (nothing, default) popup menu shown from top left corner of active panel
cm_SyncChangeDir	Synchronous directory changing in both panels. Synchronous navigation is disabled when this command is called again or automatically if there are no matching folder names.
cm_ChangeDirToParent Ctrl+PgUp, Backspace	Go to the parent directory of the current shown one.
cm_ChangeDirToHome Ctrl+Shift+Home	Go to to the user's home directory.
cm_ChangeDirToRoot Ctrl+\	Go to root directory ("/" in Unix and GNU/Linux) or root of the current disk (Windows). Also see the description of the "\" button here.
cm_TargetEqualSource Alt+Z	Open the directory of the active panel in the opposite panel.
cm_TransferLeft Ctrl+ ←	Open directory under cursor in the left panel.
cm_TransferRight Ctrl+ →	Open directory under cursor in the right panel.
cm_LeftEqualRight	Show same directory in left panel than what is in the right panel.
cm_RightEqualLeft	Show same directory in right panel than what is in the left panel.
cm_Exchange Ctrl+U	Swap file panels.
cm_EditPath	User may type directly the directory he wants see in the selected panel. Also see F2 and Shift+F6 here.
cm_ChangeDir	Will switch the active/inactive/left/right panel to the specified directory(ies). Please note that you may specify more than one parameter, so with only one command, you may set both source and target path. Parameter Value Description activepath specified_path will switch the active panel to the specified_path inactivepath specified_path will switch the inactive panel to the specified_path leftpath specified_path will switch the left panel to the specified_path rightpath specified_path will switch the right panel to the specified_path For legacy backward compatibility, you may also provide simply a single path as single parameter and DC will switch active panel to that path. Examples: cm_ChangeDir activepath=%$DESKTOP% inactivepath=E:\Medias\Paul Houde This will make the active panel to show content of the current user's desktop folder and in the inactive panel you'll see the content of "Paul Houde" one. cm_ChangeDir leftpath=C:\Working rightpath=E:\Euler No matter where is the current active panel, the left one will show content of "Working" folder and the right panel will show the one of "Euler". cm_ChangeDir \\TERA-06\OPENSHARE1\MEDIAS\PICTURES\2015 The active panel will switch to show content of the network mentioned path. cm_ChangeDir wfx://FTP The mentioned WFX plugin will be opened in the active panel.
cm_QuickSearch Ctrl+S	Quick search in directory. Parameter Value Description search on/off/cycle Determine the state of the quick search frame at the bottom: - when it's "on", the specified search parameters are applied and quick search frame is shown at the bottom - when it's "off", quick search is removed and search frame is hidden - when it's "cycle", it is to use for when you invoke many time in a row the command to go to the next matching item direction first/last/next Determine the direction of the quick search for the item that match the search criterias: - when it's "first", to the first item found from the top - when it's "last", to the last item - when it's "next", to the next one after the current one at the moment of the search. Please note that it may do a wrap around to come back to prior item if none was found after the current selected one. *Note: This option is unrevelant when the "search=cycle". matchbeginning on/off/toggle sets or toggles the match beginning option matchending on/off/toggle sets or toggles the match ending option casesensitive on/off/toggle sets or toggles case sensitivity files on/off/toggle sets or toggles filtering files directories on/off/toggle sets or toggles filtering directories filesdirectories toggles between filtering only files, only directories or both text <any string> sets any string as the new searched string
cm_QuickFilter Ctrl+F	It allows to filter the file list to show only desired files/directories. Parameter Value Description filter on/off/toggle - when it's "on", the specified filter is applied and configurable filter frame is shown at the bottom - when it's "off", filtering is removed and filter frame is hidden - when it's "toggle", it will toggle between the two previous states matchbeginning on/off/toggle sets or toggles the match beginning option matchending on/off/toggle sets or toggles the match ending option casesensitive on/off/toggle sets or toggles case sensitivity files on/off/toggle sets or toggles filtering files directories on/off/toggle sets or toggles filtering directories filesdirectories toggles between filtering only files, only directories or both text <any string> sets any string as the new filter For example, setting a tool button with the following parameters will allow pressing button to toggle the application of a filter to show only the "txt" file or not each time the button is pressed: text=txt filter=toggle files=on directories=on matchbeginning=off matchending=on When no parameter at all is specified, it will be assumed to activate the filter AND the other options will be the same as previous filter except for the text with the focus ready in the text box to allow you to type the desired text to set filter.
cm_GoToFirstEntry	Place cursor on first folder or file in list.
cm_GoToLastEntry	Place cursor on last folder or file in list.
cm_GoToNextEntry	Place cursor on next folder or file.
cm_GoToPrevEntry	Place cursor on previous folder or file.
cm_GoToFirstFile	Place cursor on first file in list.
cm_GoToLastFile	Place cursor on last file in list.
cm_ViewHistory	Will popup at the cursor position, the last directories visited. Parameter Value Description menutype popup directories in history will be displayed in a popup menu treeview directories in history will be displayed in a tree view menu (nothing) the default is assumed to be through a popup menu position panel menu will be shown from the top left corner of active panel cursor menu will be shown at the current mouse cursor position (nothing) the default is assumed to be from the mouse cursor position (nothing, default) popup menu shown at the current mouse cursor position
cm_ViewHistoryNext Alt+ →	According to list of last directories visited, will set the active panel to the very next one, if any, visited prior to current one.
cm_ViewHistoryPrev Alt+ ←	According to list of last directories visited, will set the active panel to the very last one visited prior to current one.
cm_OpenDriveByIndex	In the current tab of the specified panel, will show content of the specified drive. If no panel is specified, it will be in the current active panel. Parameter Value Description index 1 will use 1st drive of list 2 will use 2nd drive of list 3 will use 3rd drive of list n will use nth drive of list side left selected drive will be in left panel right selected drive will be in right panel inactive selected drive will be in inactive panel (absent) selected drive will be in current active panel (nothing) Specifying at least the index is mandatory. Example: "cm_OpenDriveByIndex side=left index=2" will focus panel on left and show drive E: content assuming in our current drive list we have C:, E:, S: and X:.
cm_FocusSwap	Switch focus between left and right panel. Parameter Value Description side left will set focus on left panel right will set focus on right panel (nothing, default) will set focus on the opposite panel of the current selected one

(back to top)

2.11. Help

Access the integrated help files of Double Commander.

Category "Help"
Name	Description
cm_HelpIndex F1	Open Double Commander help index page.
cm_Keyboard	Open the help page with the default keyboard shortcuts of Double Commander.
cm_VisitHomePage	Go to Double Commander's home page.
cm_About	Show program "About" information.

(back to top)

2.12. Window

Commands related with the Double Commander window, its look and behavior, like any other computer application.

Category "Window"
Name	Description
cm_HorizontalFilePanels Ctrl+Shift+H	Will set the arrangement of panels between two vertical ones disposed in left/right OR two horizontal ones disposed in top/bottom. Parameter Value Description mode (nothing)/ legacy toggle between vertical/horizontal vertical vertical panels (default) horizontal horizontal panels Example: "cm_HorizontalFilePanels mode=horizontal" will force the two panels to be in horizontal disposition, one above the other.
cm_PanelsSplitterPerPos	Set the panels width, e.g. 50% – equal size. Parameter Value Description splitpct 0-100 percentage of whole width to assign to left panel (or top panel if horizontal mode is enabled) (nothing, default) percentage set to 50-50 Example: "cm_PanelsSplitterPerPos splitpct=80", with vertical panels, will set the left panel width to 80% of the available space.
cm_ShowMainMenu	Determine if we see the main bar menu or not. Parameter Value Description menu 1/true/on/yes main menu is displayed 0/false/off/no main menu is not displayed treeview 1/true/on/yes on request, the main menu item will be shown under the form of a tree view menu 0/false/off/no dummy, will simply be ignored (nothing, default) toggle the visibility of the main menu Example: "cm_ShowMainMenu menu=off", will hide the main menu.
cm_ShowButtonMenu	Determine if we see the toolbar or not. Parameter Value Description toolbar 1/true/on/yes toolbar is displayed 0/false/off/no toolbar is not displayed treeview 1/true/on/yes on request, the toolbar menu item will be shown under the form of a tree view menu 0/false/off/no dummy, will simply be ignored (nothing, default) toggle the visibility of the toolbar
cm_OperationsViewer Alt+V	Shows a window with the file operations process currently in progress if any.
cm_OpenBar	Ex-command not implemented anymore. Since the configuration of the toolbar is done via one single simple versatile dedicated configuration window, you may want to refer to cm_ConfigToolbars command instead.
cm_Minimize	Minimize the Double Commander window.
cm_Exit Alt+X	Close Double Commander.
cm_TreeView Ctrl+Shift+F8	Tree View Panel.
cm_FocusTreeView Shift+Tab	Switch focus between current file list and tree view (if enabled).

(back to top)

2.13. Command Line

Interact with command line to view past commands and help to invoke new ones.

Category "Command Line"
Name	Description
cm_FocusCmdLine Shift+F2	Change focus to the command line.
cm_ShowCmdLineHistory Alt+F8, Ctrl+ ↓	Show history of all commands used in the command line. Parameter Value Description menutype combobox the combo box of the command line will be expanded so you may chose the command from the command line history treeview a tree view menu will be opened above the combox box of the command line (nothing) the default is assumed to be through the combo box
cm_CmdLineNext	Will activate in the next command line typed prior the current one, if any.
cm_CmdLinePrev	Will activate in the next command line typed after the current one, if any.
cm_AddPathToCmdLine Ctrl+P	Place current path in command line. Parameter Value Description mode smartquote will place the added text between quotes, only if necessary (like for example if there are spaces in it and will let it intact if there is no spaces forcequote will systematically quote that will be added neverquote will systematically never quote that will be added prompt will prompt the user if he wants to quote his added text or not, with the default choice set like if it would be a "mode=smartquote" (nothing) the default is assumed to be "mode=smartquote"
cm_AddFilenameToCmdLine Ctrl+Enter	Place filename of current selected item in command line. Note: Command also accepts the same parameters as the cm_AddPathToCmdLine.
cm_AddPathAndFilenameToCmdLine Ctrl+Shift+Enter	Place current path and filename of selected item in command line. Note: Command also accepts the same parameters as the cm_AddPathToCmdLine.
cm_ToggleFullscreenConsole Ctrl+O	Toggle fullscreen mode console window.

(back to top)

2.14. Tools

For action requiring more than a click.
These action will generally show another window to have Double Commander do some more complex jobs.

Category "Tools"
Name	Description
cm_MultiRename Ctrl+M	Open Multi-Rename Tool. Parameter Value Description preset a preset name The provided preset name will be loaded (nothing, default) Load the last settings used or what has been configured for Preset at launch
cm_Search Alt+F7	Open Search dialog with default parameters or with saved template from option "Default search template" (see File Operations > File search). Also command supports a single parameter to open Search dialog with saved template, use template name as is without quotes.
cm_AddNewSearch Ctrl+Shift+F7	Create and open a new instance of Search dialog window. Invoking this command to do a search will preserve the searches we've made earlier in the session. It will also allow to launch a new search instance to search something else while a long search is in progress.
cm_ViewSearches	If we've launched a few instances of search with the cm_AddNewSearch, this command will allow us to view a summary of them and be able to switch back to one of them.
cm_DeleteSearches	If we've launched a few instances of search with the cm_AddNewSearch, this command will allow us to close and remove from memory all of them at once.
cm_SyncDirs	Will invoke the directory synchronization tool to scan left and right panel folder to eventually see the content difference and make them equal.
cm_CompareContents	Open compare by contents dialog. If an external diff program is used, the "dir" parameter (without quotes) is available: in this case, the current directories of the left and right file panels will be passed to the program.
cm_DebugShowCommandParameters	Will simply show a message with the info passed as parameters. This may be helpful to validate the parameter you're passing to a command.
cm_DoAnyCmCommand Shift+F12	Will show an internal command selector window where user may select any of the possible internal command and execute it.

(back to top)

2.15. View

Commands related with the visibility or not of files like the system files, etc.

Category "View"
Name	Description
cm_Refresh Ctrl+R	Refresh panel.
cm_ShowSysFiles Ctrl+.	Show hidden and system files.
cm_SwitchIgnoreList	Enable or not the "Ignore list" depending of the parameter. Parameter Value Description ignorelist 1/true/on/yes ignore list is enabled 0/false/off/no ignore list is not enabled (nothing, default) toggle the state of the ignore list Example: "cm_SwitchIgnoreList ignorelist=on", ignore list is enabled so item present in the ignore list won't be shown in the panels.

(back to top)

2.16. Tabs

Interact with tabs by creating new ones, navigate through them, etc.

Category "Tabs"
Name	Description
cm_NewTab Ctrl+T	Create a new tab for opened directory.
cm_OpenDirInNewTab Ctrl+ ↑	Open directory under cursor at new tab, but don't switch to it.
cm_NextTab Ctrl+Tab	Change to next tab.
cm_PrevTab Ctrl+Shift+Tab	Change to previous tab.
cm_MoveTabLeft	Move current tab to the left.
cm_MoveTabRight	Move current tab to the right.
cm_RenameTab	Prompt user to rename current tab of active panel.
cm_CloseTab Ctrl+W	Close current tab of active panel.
cm_CloseAllTabs	Close all tabs of panel(s), excluding the active one, according to following parameters: Parameter Value Description side left action closes tabs in left panel right action closes tabs in right panel active action closes tabs in active panel inactive action closes tabs in inactive panel both action closes tabs in both panels dolocked 1/true/on/yes action closes also the locked tabs 0/false/off/no ignore locked tabs confirmlocked 1/true/on/yes if "dolocked" is true, user has to confirm closing locked tabs no matter the configured option "Confirm close locked tabs" 0/false/off/no if "dolocked" is true, close locked tabs without asking confirmation no matter the configured option "Confirm close locked tabs" (not specified) if "dolocked" is true, ask or not user to confirm closing locked tabs according to the configured option "Confirm close locked tabs" (nothing, default) close all the non locked tabs, excluding the active tab, on the active panel For legacy backward compatibility, you may also provide simply a single word as single parameter like "LeftTabs" and "RightTabs" to specify the panel where to apply command.
cm_CloseDuplicateTabs	Close tabs pointing to same dirs so at the end of action, only one tab for each dir is kept. Parameter Value Description side left action closes duplicated tabs in left panel right action closes duplicated tabs in right panel active action closes duplicated tabs in active panel inactive action closes duplicated tabs in inactive panel both action closes duplicated tabs in both panels dolocked 1/true/on/yes action closes also duplicated locked tabs 0/false/off/no ignore duplicated locked tabs confirmlocked 1/true/on/yes if "dolocked" is true, user has to confirm closing duplicated locked tabs no matter the configured option "Confirm close locked tabs" 0/false/off/no if "dolocked" is true, close duplicated locked tabs without asking confirmation no matter the configured option "Confirm close locked tabs" (not specified) if "dolocked" is true, ask or not user to confirm closing duplicated locked tabs according to the configured option "Confirm close locked tabs" (nothing, default) close all the duplicated non locked tabs on the active panel
cm_CopyAllTabsToOpposite	All tabs from the specified side will be added also on the opposite side. By default with no parameter, it copies tab from the active panel to the inactive panel. Parameter Value Description side left will copy tabs from left panel to the right one right will copy tabs from right panel to the left one active will copy tabs from active panel to the inactive one inactive will copy tabs from inactive panel to the active one both will copy tabs from both panel to the opposite ones (nothing, default) will copy tabs from active panel to the inactive one
cm_LoadTabs	Open a file expected to contains tab names and their associated directories to apply to panel. Parameter Value Description filename filename.tab the file used to load the tabs (not specified) a file requested will appear to prompt the user to indicate from which .tab file to load the tabs from loadleftto left tabs saved in left panel in .tab file will be in left panel right tabs saved in left panel in .tab file will be in right panel active tabs saved in left panel in .tab file will be in active panel inactive tabs saved in left panel in .tab file will be in inactive panel both tabs saved in left panel in .tab file will be in both panels none tabs saved in left panel in .tab file will be ignored loadrightto left tabs saved in right panel in .tab file will be in left panel right tabs saved in right panel in .tab file will be in right panel active tabs saved in right panel in .tab file will be in active panel inactive tabs saved in right panel in .tab file will be in inactive panel both tabs saved in right panel in .tab file will be in both panels none tabs saved in right panel in .tab file will be ignored keep left tabs present in left panel will be preserved right tabs present in right panel will be preserved active tabs present in active panel will be preserved inactive tabs present in inactive panel will be preserved both tabs present in both panels will be preserved none none of the present tabs will be preserved For legacy backward compatibility, you may also provide simply a single filename as single parameter and DC will load that .tab file "as is", so left and right tabs will be restored to left and right panel respectively.
cm_SaveTabs	Will save into a file the current tab names and their associated directories, for both left and right, to a .tab file to be eventually loaded back with previous described command. Parameter Value Description filename filename.tab the file used to save the tabs (not specified) a file requested will appear to prompt the user to indicate to which .tab file to save the tabs to savedirhistory 1/true/on/yes will save also the history of last directories for each tabs 0/false/off/no history of last directories won't be saved For legacy backward compatibility, you may also provide simply a single filename as single parameter and DC will save to that .tab file.
cm_SetTabOptionNormal	Current tab status to normal.
cm_SetTabOptionPathLocked	Current tab to "locked", user cannot change directory.
cm_SetTabOptionPathResets	Current tab to "locked with dir change allowed", user may change directory inside the panel, but if user changes tab and then come back to that one, it will come back to original directory where it was "locked with dir changed allowed".
cm_SetTabOptionDirsInNewTab	Current tab to "locked with dir change in new tab", user may change directory inside the panel, but as user enters in new directory, that one will be opened in a new tab.
cm_SetAllTabsOptionNormal	Set back to "normal" all the tabs. Parameter Value Description side left affects tabs in left panel right affects tabs in right panel active affects tabs in active panel inactive affects tabs in inactive panel both affects tabs in both panels (nothing, default) affects only the tabs of the active panel
cm_SetAllTabsOptionPathLocked	All tabs to "locked", user cannot change directory. Parameter Value Description side left affects tabs in left panel right affects tabs in right panel active affects tabs in active panel inactive affects tabs in inactive panel both affects tabs in both panels (nothing, default) affects only the tabs of the active panel
cm_SetAllTabsOptionPathResets	All tabs to "locked with dir change allowed", user may change directory inside the panel, but if user changes tab and then come back to that one, it will come back to original directory where it was locked. Parameter Value Description side left affects tabs in left panel right affects tabs in right panel active affects tabs in active panel inactive affects tabs in inactive panel both affects tabs in both panels (nothing, default) affects only the tabs of the active panel
cm_SetAllTabsOptionDirsInNewTab	All tabs to "locked with dir change in new tab", user may change directory inside the panel, but as user enters in new directory, that one will be opened in a new tab. Parameter Value Description side left affects tabs in left panel right affects tabs in right panel active affects tabs in active panel inactive affects tabs in inactive panel both affects tabs in both panels (nothing, default) affects only the tabs of the active panel
cm_LoadFavoriteTabs	Prompt the user with a menu asking to select a previously saved setup. Parameter Value Description setup name will load the setup name (nothing) no change current tabs, but will unselect current setup selection if any menutype popup favorite tabs will be displayed in a popup menu treeview favorite tabs will be displayed in a tree view menu (nothing) the default is assumed to be through a popup menu position panel menu will be shown from the top left corner of active panel cursor menu will be shown at the current mouse cursor position (nothing) the default is assumed to be from the top left corner of active panel (nothing, default) popup menu shown from top left corner of active panel
cm_SaveFavoriteTabs	Will save in the "Favorite Tabs" the current opened tabs. Later on, on request, user may reload these saved setup using the cm_LoadFavoriteTabs command.
cm_ReloadFavoriteTabs	Reload again the last Favorite Tabs setup that was loaded. So if after browsing in every tab and additional tabs were added, etc. we want to restore "as-is" what has been set for the last Favorite Tabs that was loaded, that's the command to invoke.
cm_ResaveFavoriteTabs	Will resave the current tabs configuration over the last loaded Favorites Tabs entry. This is useful if you realized you're missing a tab in one of your configuration. After loading your Favorite Tabs you add the missing tab you wanted and then you invoke cm_ResaveFavoriteTabs internal command.
cm_PreviousFavoriteTabs	Will load the Favorite Tabs setup that is just before in our list the last one we loaded.
cm_NextFavoriteTabs	Will load the Favorite Tabs setup that is just after in our list the last one we loaded.
cm_ActivateTabByIndex	Will activate the specified tab in the specified panel where it will also switch to. If no panel is specified, tabs used will be from the active panel. Parameter Value Description index 1 will activate 1st tab 2 will activate 2nd tab 3 will activate 3rd tab n will active nth tab -1 will activate last tab side left will switch to and use tabs of left panel right will switch to and use tabs of right panel inactive will switch to and use tabs of inactive panel (absent) activated tab will be on current active panel (nothing) Specifying at least the index is mandatory. Example: "cm_ActivateTabByIndex side=right index=1" will activate the 1st tab in the rigth panel and will switch focus on it.
cm_ShowTabsList Ctrl+Shift+A	Show a menu with a list of all open tabs. Parameter Value Description side left tabs of the left panel right tabs of the right panel inactive tabs of the inactive panel (absent) tabs of the active panel (nothing, default) tabs of the active panel

(back to top)

2.17. Logs

Actions related with DC logs file.

Category "Logs"
Name	Description
cm_ViewLogFile	Open the current log file of operation.
cm_ClearLogFile	Will erase the current log file of operation.
cm_ClearLogWindow	Will clear the log window content.

(back to top)

Originally created by Rustem (dok_rust@bk.ru)